Wednesday, 13 August 2025

Seperation method of Glucose in Sugarcane using HPLC || HPLC का उपयोग करके गन्ने से ग्लूकोज को अलग करने का तरीका

 गन्ने में मौजूद ग्लूकोज (glucose) की मात्रा का विश्लेषण करने के लिए LC-MS एक बहुत ही प्रभावी तरीका है। यह तकनीक दो प्रमुख चरणों में काम करती है: पहले सैंपल में से ग्लूकोज को अलग किया जाता है और फिर उसकी पहचान और मात्रा का पता लगाया जाता है।


आइए, इस पूरी प्रक्रिया को चरण-दर-चरण समझते हैं:


1. सैंपल की तैयारी (Sample Preparation):-

                                            सबसे पहले, गन्ने के रस या गूदे (pulp) से ग्लूकोज को निकालने के लिए सैंपल को तैयार किया जाता है।


गन्ने के रस से LC-MS सैंपल तैयार करने की विधि:-

 

चरण 1: रस निकालना और प्रारंभिक उपचार (Initial Treatment)

  1. गन्ने का रस निकालें: सबसे पहले, ताजे गन्ने को अच्छी तरह से धोकर साफ करें। फिर इसे जूसर या पेराई मशीन से निकालकर उसका रस इकट्ठा करें।
  2. फिल्टर करें: रस में गन्ने के छोटे-छोटे टुकड़े या रेशे (fibers) हो सकते हैं। इन्हें हटाने के लिए, रस को एक महीन जाली (जैसे cheesecloth) या साधारण फिल्टर पेपर से छान लें।

​चरण 2: प्रोटीन और अन्य बड़े अणुओं को हटाना (Deproteination)

​गन्ने के रस में प्रोटीन और अन्य बड़े जैविक अणु होते हैं जो LC-MS कॉलम को नुकसान पहुँचा सकते हैं या विश्लेषण में बाधा डाल सकते हैं। इन्हें हटाना बहुत ज़रूरी है।

  1. अवक्षेपण (Precipitation): सैंपल को ठंडा करने के लिए इसे बर्फ पर रखें। फिर इसमें एक उपयुक्त अवक्षेपण एजेंट (precipitating agent) जैसे एसिटोनाइट्राइल (acetonitrile), मेथेनॉल (methanol) या ज़िंक सल्फेट (zinc sulfate) का एक विशिष्ट अनुपात में मिश्रण मिलाएँ। एसिटोनाइट्राइल सबसे ज़्यादा इस्तेमाल होता है।
    • उदाहरण: एक निश्चित मात्रा में गन्ने का रस लें और उसमें 2 से 3 गुना ज़्यादा एसिटोनाइट्राइल धीरे-धीरे मिलाएँ।
  2. मिश्रण और ऊष्मायन (Mixing and Incubation): मिश्रण को अच्छी तरह से हिलाएँ और इसे कुछ मिनटों के लिए (जैसे 5-10 मिनट) कमरे के तापमान पर या ठंडी जगह पर रखें। इससे प्रोटीन और अन्य अवांछित पदार्थ अवक्षेपित (precipitate) होकर ठोस रूप में बदल जाते हैं।
  3. अपकेंद्रीकरण (Centrifugation): इस मिश्रण को सेंट्रीफ्यूज मशीन (centrifuge machine) में डालें और इसे तेज गति (जैसे 10,000 rpm) पर 10-15 मिनट तक घुमाएँ। अपकेंद्रीकरण के बाद, ठोस अवक्षेप ट्यूब के नीचे बैठ जाएगा और ऊपर एक साफ तरल (supernatant) बचेगा।

​चरण 3: आगे की सफाई और सांद्रण (Further Clean-up and Concentration)

  1. सुपरनेटेंट इकट्ठा करें: सेंट्रीफ्यूज के बाद मिले साफ तरल (supernatant) को बहुत सावधानी से एक नई साफ ट्यूब में निकाल लें। इस चरण में, ठोस अवक्षेप को गलती से नहीं लेना चाहिए।
  2. विलायक को वाष्पित करना (Evaporation): अगर सैंपल को ज़्यादा सांद्र (concentrated) करने की आवश्यकता है, तो इसे रोटरी इवैपोरेटर (rotary evaporator) या नाइट्रोजन गैस के प्रवाह का उपयोग करके वाष्पित करें। यह प्रक्रिया बहुत सावधानी से करनी चाहिए ताकि नमूने में मौजूद यौगिकों को नुकसान न पहुँचे।
  3. पुनर्गठन (Reconstitution): वाष्पीकरण के बाद बचे हुए सूखे अवशेष (dry residue) को LC-MS के लिए उपयुक्त एक छोटे आयतन वाले विलायक (जैसे एसिटोनाइट्राइल और पानी का मिश्रण) में फिर से घोल लें।

​चरण 4: अंतिम फिल्ट्रेशन (Final Filtration)

  1. माइक्रोफिल्टर से छानना: LC-MS में इंजेक्ट करने से पहले, सैंपल को 0.22 माइक्रोन (micron) या 0.45 माइक्रोन के सिरिंज फिल्टर (syringe filter) से छानना बहुत ज़रूरी है। यह अंतिम चरण किसी भी बहुत छोटे कणों को हटा देता है जो LC कॉलम को बंद कर सकते हैं।

​चरण 5: LC-MS में इंजेक्शन

  1. ऑटोसेम्पलर में लोड करें: अब आपका सैंपल LC-MS विश्लेषण के लिए पूरी तरह से तैयार है। इसे एक छोटे शीशे के वायल (vial) में भरें और LC-MS उपकरण के ऑटोसेम्पलर (autosampler) में रख दें।


2. लिक्विड क्रोमैटोग्राफी (LC) द्वारा पृथक्करण :-

                                       अब तैयार किए गए सैंपल को लिक्विड क्रोमैटोग्राफी (LC) उपकरण में इंजेक्ट किया जाता है।

A) कॉलम (Column):- ​LC सिस्टम का सबसे महत्वपूर्ण हिस्सा कॉलम होता है। इस कॉलम के अंदर एक ठोस पदार्थ भरा होता है, जिसे स्टेशनरी फेज (stationary phase) कहते हैं। शर्करा के विश्लेषण के लिए, अक्सर एक ऐसा स्टेशनरी फेज इस्तेमाल किया जाता है जो शर्करा के अणुओं के साथ अलग-अलग तरह से इंटरैक्ट कर सके।

  • अमीनो कॉलम (Amino Column) या HILIC (Hydrophilic Interaction Liquid Chromatography) जैसे कॉलम अक्सर शर्करा के लिए उपयोग किए जाते हैं। इनका सिद्धांत यह है कि ये पानी-पसंद (hydrophilic) अणुओं को अपनी ओर आकर्षित करते हैं।

B) मोबाइल फेज (Mobile Phase): एक तरल पदार्थ (जैसे, एसिटोनाइट्राइल और पानी का मिश्रण) मोबाइल फेज के रूप में काम करता है, जो सैंपल को कॉलम से होकर गुजारता है।

C) ग्लूकोज का अलग होना: जब सैंपल कॉलम से गुजरता है, तो ग्लूकोज और अन्य शर्करा (जैसे सुक्रोज और फ्रक्टोज) अपने अलग-अलग रासायनिक गुणों के कारण कॉलम में अलग-अलग समय पर रुकते हैं और बाहर निकलते हैं। इस प्रक्रिया से ग्लूकोज अन्य घटकों से अलग हो जाता है।


3. मास स्पेक्ट्रोमेट्री (MS) द्वारा विश्लेषण:-

                                         जब ग्लूकोज LC कॉलम से बाहर निकलता है, तो यह सीधे मास स्पेक्ट्रोमीटर (MS) के इंटरफ़ेस में जाता है।

A) आयनीकरण (Ionization): इंटरफ़ेस में, ग्लूकोज के अणुओं को आयनित (charged particles में बदलना) किया जाता है। ESI (Electrospray Ionization) जैसी तकनीक इस काम के लिए बहुत उपयोगी होती है।

B) द्रव्यमान-से-चार्ज अनुपात (m/z) का मापन: मास स्पेक्ट्रोमीटर इन आयनों को उनके द्रव्यमान-से-चार्ज अनुपात (m/z) के आधार पर अलग करता है। ग्लूकोज का एक विशिष्ट m/z अनुपात होता है, जिसके आधार पर इसे आसानी से पहचाना जा सकता है।

C) मात्रा का पता लगाना: MS उपकरण में एक डिटेक्टर होता है, जो हर आयन की मात्रा को मापता है। जितनी अधिक मात्रा में आयन डिटेक्टर तक पहुँचते हैं, उतनी ही अधिक ग्लूकोज की मात्रा सैंपल में मौजूद होती है।


Monday, 23 June 2025

June / 2025 Monthly Current Affairs

 1. भारत - फ्रांस के बीच 8th  संयुक्त सैन्य अभ्यास " शक्ति" फ्रांस में हुआ शुरू।


2. चिली और दक्षिण कोरिया की मेजबानी में होगा वर्ष 2028 में  चौथा संयुक्त राष्ट्र महासागर सम्मेलन ।

3. ईरान ने इजराइल के ऑपरेशन "रेजिंग लाइन"  के विरुद्ध मे " ऑपरेशन टू प्रोमिस 3" ओपन किया।

4. वियतनाम  आधिकारिक तौर पर ब्रिक्स में भागीदार देश के रूप में हुआ शामिल ।

5. साउथ अफ्रीका ने आस्ट्रेलिया को हराकर जीती विश्व टेस्ट चैंपियन शिप 2025 ।

6. भारतीय सेना ने पोखरण फायरिंग रेंज में सटीक हमले के लिए "रुद्राक्ष VTOL ड्रोन" का किया सफल परीक्षण।

7. पंजाब में आंदोगिक को बढ़ावा देने के लिए "उद्योग क्रांति" पहल और " प्रोत्साहन पोर्टेल " किया लॉन्च ।

8. क्रिस्टियानो रोनाल्ड को स्पोर्ट्स वर्ल्ड कप 2025 के लिए गोलोबल ब्रांड एंबेसेडर किया गया नियुक्त ।

9. भारत सरकार ने जापान को निर्यात किए जाने वाले दुर्लभ मृदा धातु पर रोक लगाने का दिया निर्देश ।

10. क्रोएशिया जाने वाले प्रधानमंत्री नरेंद्र मोदी बने पहले भारतीय P.M ।

11. भारत की पवन ऊर्जा क्षमता 10.5% से अधिक बढ़कर हुई  51.5% गीगावाट।

12. ब्लेज मेट्रियली बनी ब्रिटिश खुफिया एजेंसी  "M16" के इतिहास की पहली महिला प्रमुख ।

13. केंद्रीय गृह मंत्री अमित शाह ने की 2027 के लिए 16th जनगणना की घोषणा ।

14. इजरायल ने ईरान के दुनिया के सबसे बड़े गैस क्षेत्र " दक्षिण पारस" पर किया हमला ।

15. प्रधान मंत्री नरेंद्र मोदी को साइप्रस के सर्वश्रेष्ठ सम्मान " ग्रैंड क्रास ऑफ मेकरियोश III " से किया गया सम्मानित ।

16. केंद्रीय गृह सचिव गोविन्द मनोहर एयर इंडिया AI 171 दुर्घटना की जांच का करेंगे नेतृत्व ।

17. केंद्रीय मंत्री कमलेश पासवान ने चेन्नई में गरुड़ एयर स्पेस के पहले कृषि ड्रोन स्वदेशीकरण सुविधा का किया उद्घाटन ।

18. केंद्रीय मंत्री हरदीप सिंह पूरी ने दिया अंडमान सागर में प्रमुख तेल खोज का संकेत ।

19. स्वीडन के ग्रीन फर्टिलाइजर नाइट्रो कैप्ट को  मिला वर्ष 2025 का फूड प्लेनेट पुरस्कार ।

20. भारत ने अंतरराष्ट्रीय योग दिवस के 10 वर्ष पूरे होने  के उपलक्ष्य मे विशाखापत्तनम को चुना  राष्टीय मेजबान ।

21. यु मुंबा टीटी ने फाइनल में जयपुर पैट्रियट्स को हराकर जीता पहला अल्टीमेटम टेबल टेनिस का खिताब ।

22. पहली बार इसरो ने यूपी के कुशीनगर से किया मॉडल रॉकेट लॉन्च का सफल परीक्षण ।

23. SIPRI की रिपोर्ट के अनुसार भारत के पास हैं 180 परमाणु हथियार ।

24. भूपेंद्र यादव को इंटरनेशनल विंग कैट एलियंस का अध्यक्ष किया गया नियुक्त ।

25. आर्मंड डुप्लांटिस ने  6.28 मीटर वॉल्ट के साथ बनाया 12th बार वर्ल्ड रिकॉर्ड ।

26. 17 जून को विश्व भर में मनाया गया विश्व मरुस्थलीकरण रोकथाम दिवस 2025 ।

27. जयपुर के पास अरावली पहाड़ियों में नई फूलदार पौधें की प्रजाति "पोर्टुलाका भारत" की हुई खोज ।

18. गोवा के ओज़ो फेनी को मिला जी आई टैग ।

29. केंद्रीय रेल मंत्री अश्वनी वैष्णव ने मानसर में भारत के सबसे बड़े गतिशक्ति कार्गो टर्मिनल का किया उद्घाटन ।

30. महाराष्ट्र कैबिनेट ने कृषि क्षेत्र में बदलाव के लिए " MahaAgri-AI -2025-29 "  नीति को दी मंजूरी ।

31. भारतीय टेनिस स्टार अंकिता रैना ने फ्रांस की एलिस रोवे के साथ मिलकर जीता पुर्तगाल ITF  महिला टूर्नामेंट में युगल खिताब ।

32. असम के मुख्यमंत्री ने " मुख्यमंत्री जीवन प्रेरणा" और स्वागत सत्यार्थ पोर्टल किया लॉन्च ।

33. रक्षा क्षेत्र में साइबर लचीलापन बढ़ाने के लिए साइबर सुरक्षा अभ्यास किया गया ।

34. संयुक्त राष्ट्र की "UN women in executive leadership report 125" में भारत को मिला 174th rank ।

35. फ्रांस और मध्य प्रदेश ने पर्यटन और सांस्कृतिक सहयोग के लिए किया समझौता ज्ञापन ।

36. " Skytrax 2025 " अवार्ड में इंडिगो को दुनिया का सबसे कम लागत वाली एयरलाइन में मिला तीसरा स्थान ।

37. बिहार शहरी चुनावो के लिए मोबाइल आधारित ई - वोटिंग प्रणाली अपनाने वाला बना पहला राज्य ।

38. संयुक्त राष्ट्र ने 4 दिसंबर को एकतरफ़ा जबरदस्ती उपाय के खिलाफ अंतर्राष्ट्रीय दिवस के रूप में किया घोषित ।

39. पहली बार इसरो ने यूपी के कुशीनगर में किया मॉडल रॉकेट लॉन्च का सफल परीक्षण ।

40. आंध्र प्रदेश में स्कूली बच्चों को वित्तीय सहायता देने के लिए  "ताल्लीकी वंदनम " योजना की शुरू ।

41. "देसी ऊन " ने फ्रांस में जीता अंतर्राष्ट्रीय एनीमेशन महोत्सव में सर्वश्रेष्ठ कमीशन फिल्म के लिए जूरी पुरस्कार ।

42. सुचिता राज खन्ना का पहला उपन्यास " थे स्टार्स लाइट द वे" क्या हुआ विमाेचन ।

43. भारत चीन सीमा पर हिमाचल प्रदेश में शिपकिला दर्रा को घरेलू पर्यटको के लिए किया गया प्रारंभ ।

44. WHO ने कोविड-19 की सबवैरिएंट " निम्बस" के तेज प्रसार और " रेजर ब्लेड थ्रोट" नमक दर्दनाक स्थिति के कारण को किया चिन्हित |

45. ईरान से भारतीयों को निकालने के लिए केंद्र सरकार ने ऑपरेशन सिंधु कया लॉन्च ।

46. भारत को विश्व आर्थिक मंच के ऊर्जा संक्रमण सूचकांक 2025 में मिला 71th स्थान ।

47. केरल उच्च न्यायालय ने 2 अक्टूबर से राज्य में प्लास्टिक पर प्रतिबंध लगाने का दिया आदेश ।

48. QS रैंकिंग 2026 में आईआईटी दिल्ली को मिला भारतीय संस्थानों में सिर्फ स्थान ।

49. रिलायंस इंफ्रा और डसांल्ट एवियशन महाराष्ट्र में फाल्कन 2000 जेट का करेंगे निर्माण ।

50. शिक्षा मंत्रालय की वर्ष 2023-24 प्रदर्शन ग्रेड इंडेक्स 2.0 
रिपोर्ट में चंडीगढ़ बना सबसे अच्छा प्रदर्शन करने वाला राज्य / केंद्र शासित प्रदेश बना। 

51. अंतर्राष्ट्रीय श्रम संगठन ने पहली बार कार्य स्थल पर जैविक खतरों के विरुद्ध अपनाया कन्वेंशन ।

52. पदम श्री पुरस्कार विजेता "अरण्य ऋषि " नाम से प्रसिद्ध मारुती चिंतमपल्ली का 93 वर्ष की उम्र में हुआ निधन ।

53. अंग्रेजी भाषा में सिद्धार्थ उपन्यास को मिलेगा साहित्य अकादमी युवा पुरस्कार 2025 ।

54. फास्ट्रेक की नई योजना के तहत ₹3000 में मिलेगा साल भर का टोल ।

55. NIHSAD भोपाल को WOAH और FAO द्वारा कैटेगरी A रीडरपेस्ट सुविधा के रूप में किया नामित ।

56. ग्लोबल लायबिलिटी इंडेक्स 2025 में डेनमार्क के कोपेनहेगन को मिला सिर्फ स्थान ।

57. जापानी ऑटोमोबाइल दग्गज होंडा ने पुनः प्रयोज्य रॉकेट का किया सफल परीक्षण।

58. केंद्र सरकार ने सिकल सेल रोग कि दवा विकसित करने के लिए 10Cr. रूपये का " बिरसा मुंडा पुरस्कार" करेगी प्रारंभ ।

59. बिहार राज्य ने पहले डीजल इंजन को अफ्रीकी देश गिनी को किया निर्यात ।

60. UPSC ने कि शीर्ष परीक्षा उत्तीर्ण करने वालों को नौकरी खोजने में मदद करने के लिए " प्रतिभा सेतु पर्टल " की शुभारंभ ।

61. आज " एक पृथ्वी , एक स्वास्थ्य के लिए योग " थीम पर मनाया जाएगा अंतर्राष्ट्रीय योग दिवस 2025 ।

62. दिल्ली विश्वविद्यालय ने एसटी छात्रों को डिजिटल और उच्च शिक्षा कौशल से सशक्त बनाने के लिए " जयहिंद योजना " की शुरू ।

63. अफ्रीकी देश कन्या में पहली बार हुआ " अंतरराष्ट्रीय धार्मिक स्वतंत्रता शिखर सम्मेलन 2025 " ।

64. महाराष्ट्र ने स्कूलों में हिंदी को सामान्य तीसरी भाषा के रूप में किया नामित । 

65. NIHSAD भोपाल को WOAH और FAO द्वारा कैटेगरी A रीडरपेस्ट सुविधा के रूप में किया नामित ।

66. अंतर्राष्ट्रीय ऊर्जा एजेंसी के अनुसार भारत वैश्विक बिजली उत्पादन वृद्धि में बना तीसरा सबसे बड़ा योगदानकरता देश ।

Wednesday, 26 March 2025

Selectivity of Reducing Reagents || Organic synthesis

Reduction:-

                    There are three different ways to define the reduction process in chemical science which can be given as -

A) Removal of oxygen 

B) Addition of hydrogen 

C) Decrease in the positive Oxidation state or Increase in the Negative Oxidation state of the element present in the species .


Order of Reducing compound:-

RCOOOH<RCOOR<RCOOH<RCOR<RCHO<CH3OH< Alkyne<Alkene 


1) Reduction of Alkene:-

A) Heterogeneous hydrogenation ( Pt, Ni, Pd, Rh, Ru etc)

B) Homogeneous hydrogenation.                    ( H2/(PPh3)RhCl)

C) by IA metal in liquid amoniya.                    ( Na/NH3(l))/C2H5OH

D) by diimide ( NH=NH)


2. Reduction of Alkyne:-

A) Catalytic Hydrogenation ( H2/Pd-C) or.      (PPh3)RhCl or H2/Pd-BaSO4) or H2/Pd-Quinoline

B) by IA metal in liquid amoniya ( Na/NH4(l)) / C2H5OH


3. Reduction of Aromatic hydrocarbons:-

A) Complete reduction by Ni ( 150-200©)

B) Partial reduction by Na/NH3(l)/C2H5OH 


4. Reduction of Carboxylic acids:-

A) lithium Aluminium hydride 











Saturday, 8 March 2025

Science TGT/PGT MCQ Quiz

 1. IUPAC Nomenclature: - 
                                              IUPAC Nomenclature is the most important topic for TGT/PGT and other science examination, so dear students your first Test is based on IUPAC NOMENCLATURE Live. Click the given poster or below link and attend the test. 


 Start Quiz  click here 


Thursday, 6 March 2025

Selectivity of oxidising and reducing reagent || organic synthesis

 Oxidation:- 

                     A reaction in which transfer of electron happened called oxidation reduction reaction or redox reaction. 

             The species that loses electron is oxidised and compound gains electron is reduced.


Order of oxidising compound:-


Alkyne<alkene<alkane<alcohol<aldehydes < ketone< carboxylic acid.


Oxidising reagents:-

1. Oxidation of alkene 

A) peroxyacides ( RCOOOH)

B) By potassium permanganate ( KMnO4)

C) By Osmium tetroxide ( OsO4)

D) By Silver salt and Iodine ( PhCOOAg/I2)

     I) prevost reaction - trans alcohol (product)

     II) woodeard reaction - Cis alcohol (product)

E) By lead tetra acetate (Pb(CH3COO)4)


2. Oxidation of Alcohol 

A) Chromic acid ( Na2Cr2O7/H2SO4)

B) By Jones reagent ( CrO3/H2SO4) Chromic trioxide 

C) By Pyridinium chloro chromate (PCC) or Pyridinium dichromate (PDC)

D) By Swern oxidation [ ( DMSO/CoCl2):60© and Et3N ]

E) By Dress Martin Reagents

F) By Tetramethy piperidine  nitroxide [ TEMPO]

G) Manganese Dioxide (MnO2]

H) By Bismuth oxide [ Bi2O3]

I) By Silver Carbonate [AgCO3]

J) By ceric ammonium Nitrate [CAN]

K) Appenaur oxidation (AlCOtBu)3/acetone 


3. Oxidation of 1-2 Diols :-

1. By Lead Tetra acetate ( LTA)

2. By Ceric ammonium Nitrate [ CAN]

3. By Dress Martin Reagents 

4. By Sodium Periodate ( NaIO4)


4. Oxidation of Aldehyde and Ketone:-

1. By Tollen Reagent:- a dilute solution of silver nitrate in aqueous ammonia is called tollen's reagent

 

2. By Fehling Reagent 


3 By Benedict's Reagent :- It is a chemical reagent mixture of sodium carbonate (Na2CO3), Sodium Citrate (Na3C6H5O7), Cupper (II) Sulfate pentahydrate( CuSO4.5H2O)


4. Baeyer Villiger Oxidation Reaction (CF3COOOH)


5. By Holofarm Reaction:- formation of haloform (CHF3) with the sodium or potassium solt of carboxylic acid on treating of alpha - methyl carbonyl compounds with halogen in the present of NaOH or KOH is known as Haloform Reaction.


4. Oxidation of Amines:-

1. By H2O2

2 By KMnO4 







Sunday, 8 September 2024

Mass Spectroscopy || The Rule of 13

Mass Spectroscopy 



 The rule of 13 :-

                         In some step the rule of 13 is completed 

Step 1:- 

             If m/z ( mass/ions) value is given then divided the given value for 13 and find the quotient value and reminder value.


Step 2:-

           Quotient value show the number of carbon atoms present in the compound. The addition of reminder value and the quotient value show the number of hydrogen atoms present in the compound.


Step 3:-

             If a Oxigen is present in the compound then, 

   number of carbon atoms = quotient value - 1

   Number of hydrogen atoms = quotient value + Reminder value - 4


Step 4:-

            If two oxigen atoms present in compound then, 

  Number of carbon atoms = quotient value - 2

  Number of hydrogen atoms  = quotient value + Reminder value - 8


Step 5:-

              If one Nitrogen atoms present in the compound then,

Number of carbon atoms = quotient value - 1

Number of hydrogen atoms = quotient value + Reminder value - 2


Step 6:-

              If two nitrogen atoms present in the compound then,

 Number of carbon atoms = quotient value - 2

Number of hydrogen atoms = quotient value + Reminder value - 4


     You notice the step number of carbon atoms decrease according to the number of Oxygen and nitrogen atoms present in the compound and number of hydrogen atoms decrease according to the multiplication of 4 and 2 .


Example 1:-

                     Draw the possibile structure for the ester that has a molecular ion with an m/z value of 74.

Solution:-

                 Dividing 74 by 13 then quotient value is 5 and Reminder value is 9.

We know that ester have two oxigen atoms.

  Then,

Number of carbon atoms = 5-2 = 3

Number of hydrogen atoms = 5+9-8 = 6

So given compound molecular formula is C3H6O2.


Possibile structure:-




Monday, 26 August 2024

Double bond equivalent (DBE) || NMR Spectroscopy

 Double bond equivalent:-

                                                Double bond equivalent is a method of calculation to calculate the double bond or ring present in the given chemical formula . When you draw the structure of chemical formula then need to the value of double bond equivalent value. it is also known as degree of unsaturation.  Formula of double bond equivalent is given below,


                  DBE = (2*C + 2 - H - X + N ) /2

Where,

C = No of carbon atoms 

H = No of hydrogen atoms 

X = No of halogen atoms ( F, Cl, Br, I, At )

N = No of nitrogen atoms 


Example:-

                    Let the chemical formula is C7H8O. then find the value of double bond equivalent ?

Solution:-

Given, 

No of carbon = 7

No of hydrogen = 8

No of halogen atoms = 0 

No of nitrogen atoms = 0

 

  DBE = (2*7 + 2 - 8 - 0 + 0)/2

           = 8/2

           = 4


Structure defines according to DBE value:-

                                                                                A comman use of DBE value is that, how to create a molecular structure when molecular weight is given. Condition is given below,

1. If DBE value is one :- 

                                         It is denoted that a ring or a double bond present in the molecular structure.

Example:- C6H12 , C3H6,  C3H6O etc.


2. If DBE value is two:-

                                         It denoted that a ring and a double bond or two double bond present in the molecular structure.

Monday, 29 July 2024

How to Shut down your computer using user form command button // Shut down your computer using VBA code

 Follow the below Number steps for shut down your computer directly when you click the command button. If you want to know how to create a Command Button then open the MS Excel and fallow step.

A) open developer tab

      If developer tab is not look then click the MS Office logo and click the Excel options and check ✅ show Developer tab in the Ribbon .





B) click the Visual Basic.



C) click the Insert User Form 



D) select the command button in open Tool Box and draw the command button in open User Form.



Step 1:- 

            First you create a Command Button in MS Excel User Form. Then dibble click the command button.


Step 2:-

           Write the below code 



Start code 

On error resume next 

Activeworkbook.save

Application.DisplayAlert = false 

Application.Quit

Shell " Shutdown -s -t 30 "

End code 


Step 3:-

             When you complete the code , then click the run command. Your MS Excel sheet save automatically in your computer and other functions is closed automatically within 30 seconds and your computer is Shut down properly.



Friday, 12 July 2024

Synthesis of Benzoin ( 2-hydroxy-1,2-diphenylethanone ) using Benzaldehyde

 Benzoin:-

                 Benzoin is the organic compound that hydroxyketone with two phenyl group. Formade by the condensation of two molecules of Benzaldehyde.

               This reaction is called Benzoin condensation is classically catalysed by cyanide salts. You can also used thiazolium compound like Thiamine.


Precautions:-

1. Benzaldehyde is toxic .

2. Ethyl alcohol is flammable.

3. Sodium hydroxide is corrosive.

4. Benzoin formed after the reaction is pretty nasty small.

5. Use necessary protection equipment while handling chemical.


Preparation method:-


Mechanisms:-

Step 1.


Step 2. 



Material required:-

1. Thiamine hydrochloride = 3.55g

2. 95% Ethyl alcohol = 35 ml

3. 3M NaOH solution = 8 ml

4. Benzaldehyde = 20 ml


Pratical step:-

1. Taken 100ml Round botal flask and add 3.55g of Thiamine hydrochloride and 8 ml of distilled water and mix then add 95% Ethyl alcohol 35 ml .

2. Now place the Round botal flask in an ice both to cool 0 degree Celsius.

3. Drop - Drop add 3M NaOH in the Round botal flask, then colour is changed white to yellow.

4. Now add Drop - Drop 20 ml of Benzaldehyde in the Round botal flask and mix properly in whole time.

5. Warm the flask generally in a water both 60 degree Celsius for 90 min , yellow colour Cristal is seperate down in the Round botal flask.

6. After the cooling the room temperature again we contect the ice cold water to croud product.

7. Now filter the liquid crystals for simple gravity filter method.

8. Now Recristaliged for hot Ethyl  alkohol .

9. 9.3g Benzoin 23% yeild .


Tuesday, 9 July 2024

Synthesis of Benzil ( 1,2-diphenylethan-1,2-dione ) using Benzoin

Benzil:-

              Benzil is an organic compound and its molecular formula ( C6H5CO )2. It is also known as 1, 2-diphenylethan-1,2- dione . Benzil is yellow in colour and its is one of the most common diketones. 



Preparation method:-

                                     Oxidation of Benzoin ( 2-Hydroxy-1,2-diphenylethanone ) make the Benzil.




Precautions :-

A) Nitric acid is corrosion. Avoid the direct contact.

B) it can even corrode nitrile gloves. 

C) After the reaction the smell of Benzoin is pretty nasty.

D) Use necessary protection equipment while handling chemical.


Material required:-

1. Benzoin - 5g

2. Nitric acid 70% - 20ml

3. Ethanol 96% - 50ml


Pratical step:-

1. Teken 100ml Round botal flask and fix it.

2. Transfer 5g Benzoin in a RB flask.

3. Add 20ml of constrated 70% Nitric acid.

4. After the same time Reaction is opening in the room temperature.

5. Keep the boiling water contener and dip the RB flask and heat the contener in 30 min.

6. Mix the mixture in glass rod when the RB flask is heated.

7. In the end of reaction yellow colour mixture is present in the RB flask.

8. Mix the RB flask liquid in 100ml ice cold distilled water ana water slowly.

9. Filter the liquid in using the simple gravity filter method.

10. For the Recristalization add the hot Ethanol.

11. Yellow colour Benzil Cristal is seperate then again filter the liquid.


Not dry in sun light because it is reached the sun light.






Monday, 20 May 2024

Significant Figures and Rule for Reporting ( सार्थक अंक और निर्धारित करने के नियम )

 सार्थक अंक :-

                   सार्थक अंक वह अंक है जो उस स्थान पर जहाँ वह उपस्थित है किसी राशि की मात्रा को बताते है।

 सार्थक अंक के नियम :-

1 . सभी अंक सार्थक अंक होते है।

जैसे :- 1234 , 542 , 9852 ete

2 . अंको के बिच में उपस्थित शून्य भी सार्थक अंक होता है।

जैसे :- 1205 , 908 , 7005 आदि

3 . अंको के दाहिने तरफ उपस्थित शून्य सार्थक अंक होते है।

जैसे :- 500 , 40 , 700 , 590 आदि

4 . अंको के वाये तरफ उपस्थित शून्य सार्थक अंक नही होते है।

जैसे :- 05 , 0529 , 002 आदि मे सार्थक अंको की संख्या क्रमशः 1 , 3, तथा 1 है।

5 . दशमलव के बाद अंक के वाये तरफ उपस्थित शून्य सार्थक अंक होते है।

जैसे :- 9.O56 , 0.032 आदि में सार्थक अंको की संख्या क्रमश : 4 , तथा 3 हैं।

6 . दशमलव के बाद बिना अंक के उपस्थित शून्य सार्थक अंक नही होते है।

जैसे :- 9.00 , 89.00 आदि में सार्थक अंको की संख्या क्रमशः 1 तथा 2 है।

7 . दशमलव के बाद अंक के दाहिने तरफ उपस्थित शून्य सार्थक अंक नही होता है।

जैसे :- 72.50 , 592.590 , 245.50 आदि में सार्थक अंको की संख्या क्रमशः 3 , 5 तथा 4 है।


कुछ महत्वपूर्ण प्रश्न :-

1. सार्थक अंको की संख्या ज्ञात कीजिए ।

a ) 5924

b )  05905

c )  059.20

d ) 3245O

e ) 00.05

f ) 30.510

g ) 35.00


Solution :-

a) 4

b ) 4

c ) 3

d ) 5

e ) 2

f ) 4

g) 2


Wednesday, 15 May 2024

Most Important Metal and his ores || कुछ महत्वपूर्ण धातु और उनके अयस्क

 Ores ( अयस्क ) :-

                          धातु तथा उनके यौगिक पृथ्वी मे जिस रुप में मिलते है, वे खनिज कहलाते है। वे खनिज जिनसे जिनसे धातुएं सुविधापूर्वक कम लागत में प्राप्त की जा सके , अयस्क कहलाते है।


अयस्क के प्रकार :-

1. ऑक्साइड अयस्क :-

                              लोहा , ऐलुमिनियम , मैंगनीज , जस्ता , तॉबा आदि धातुओंं में ऑक्सीजन के प्रति विशेष स्नेह होता है। अतः ये धातुएं ऑक्साइड अयस्क के रूप में पायी जाती है । 

जैसे : - हेमेटाइट ( Fe2O3 ) , मैग्नेटाइट ( Fe3O4 ) , बॉक्साइट ( Al2O3.2H2O ) , पायरोलुसाइट ( MnO2 ) , जिंकाइट ( ZnO ) , कैसिटेराइट ( SnO2 ) आदि ।


2. सल्फाइड अयस्क :- 

                             सल्फाइड अयस्क में D - block के तत्व पाये जाते हैं। जिनमे से कुछ इस प्रकार है।

जैसे :- कॉपर पाइराइट ( CuFeS2 ) , आयरन पाइराइट ( FeS2 ) , गैलेना ( PbS2 ) , जिंक ब्लैंड ( ZnS ) , सिनेबार ( HgS ) , अर्जेन्टाइट ( Ag2S ) आदि ।


3. कार्बोनेट अयस्क :-

                            प्रकृति मे उपस्थित धातुओं के ऑक्साइड और हाइड्रॉक्साइड , वायु की CO2 से क्रिया करके कार्बोनेट अयस्क बनाते है। अधिक विद्युत धनी धातुओं के अयस्क कार्बोनेट के रूप में मिलते है। 

जैसे :- डोलोमाइट ( MgCO3.CaCO3 ) , सिडेराइट (FeCO3 ) , मैलेकाइट (CuCO3.Cu(OH)2 ) , कैलेमाइन (ZnCO3 ) , मैग्नेसाइट ( MgCO3 ) , सेरुसाइट ( PbCO3 ) आदि ।


4. सल्फेट अयस्क :-

                         वे धातु सल्फाइडों की वायुमण्डलीय ऑक्सीजन से क्रिया के फलस्वरूप बनते है।

जैसे :- एप्समाइट या एप्सम लवण ( MgSO4.7H2O ) , जिप्सम ( CaSO4.2H2O ) , सेलेस्टाइन ( SrSO4 ) , एंग्लीसाइट ( PbSO4 ) , बैराइटीज ( BaSO4 ) , ऐलूनाइट ( K2SO4.Al2(SO4)3.4Al(OH)3 ) आदि ।


5. हैलाइड अयस्क :- 

                          हैलाइड के रूप में धातु समुद्र के अन्दर चा भूपर्पटी मे पाए जाते है।

जैसे :- हार्नसिल्वर ( AgCl) , क्रोयोलाइट ( AlF3.3NaF or Na3AlF6) , फ्लोरस्पार ( CaF2 ) , खनिज लवण ( NaCl ) , कार्नेलाइट ( KCl.MgCl2.6H2O ) आदि ।


6. सिलिकेट अयस्क :- 

                            लिथियम , बेरिलियम , मैग्नीशियम , एलुमिनियम आदि धातु सिलिकेट अयस्कों के रूप में पायी जाती है।

जैसे : - स्पोडुमेन ( LiAl(SiO3)2 ) , बेरिल ( 3BeO.Al2O3.6SiO2 ) , टैल्क ( 3MgO.4SiO2.2H2O ) , चीनी मिट्टी ( Al2O3.2SiO2.2H2O ) ऐस्बेस्टॉस (CaMg3(SiO3)4 ) अभ्रक ( KH2Al2(SiO3)4) आदि ।

 

7. नाइट्रेट अयस्क :-

                          नाइट्रेट के रूप मे सोडियम , पोटेशियम धातुएँ पायी जाती है।

जैसे :- शोरा ( KNO3) , साल्टपीटर ( NaNO3 ) आदि ।











Thursday, 9 May 2024

Boiling Point of Functional Group

 Functional Group:-

                                 When a group attached with carbon chain and charge the physical and chemical properties is called Functional Group.

Many types of functional group,

1. Ether

2. Ester

3. Amine

4. Aldehyde 

5. Ketone 

6. Alcohol 

7. Carboxylic acid 

8. Amide


Know in this topic I will discuss about the boiling Point of Functional Group. 

Note :-

            Boiling Point of alkanes is -42©.


1. Ether:-

                chemical formula of ether is R-O-R'. Boiling Point of ether is 11©.


2. Ester :-

               Chemical formula of ester is R-COO-R' . Boiling Point of Ester is 32©.


3. Amine:- 

                   Chemical formula of amine is R(N)R'R". Boiling Point of amine is 49©.


4. Aldehyde:- 

                       Chemical formula of aldehyde is RCHO. Boiling Point of aldehyde is 49©.


5. Ketone:-

               Chemical formula of ketone is RCOR'. Boiling Point of ketone is 56©.


6. Alcohol:-

               Chemical formula of alcohol is ROH. Boiling Point of alcohol is 117©.


7. Carboxylic acid:-

                              Chemical formula of carboxylic acid is RCOOH. Boiling Point of carboxylic acid is 118©.


8. Amide:-

             Chemical formula of amide is RCONH2. Boiling Point of amide is 222©.










Sunday, 7 April 2024

History of Modern Periodic Table || आधुनिक आर्वत सारणी का इतिहास

 Introduction:-

                         18 वी शताब्दी के प्रारंभ में क्या तत्वों की संख्या बहुत कम थी अतः इनका तथा उनके यौगिक का अध्ययन करना एक सरल कार्य था । परन्तु निरन्तर नए नए तत्वों की खोज होने के कारण उनके अध्यन मे कठिनाई होने लगी । इस समस्या से निपटने के लिए बैज्ञानिको ने उन्हे क्रम से उनके गुणधर्मों के अधार पर अलग करने के कुछ नियम बनाये जिन्हे आवर्त नियम कहते है।



      कुछ बैज्ञानिको के नियम जो बहुत अधिक मान्य हुए कुछ इस प्रकार है।

1) डोबेराइनर का त्रिक माडल :-

                                       इस नियम के अनुसार तत्वों को उनके परमाणु द्रव्यमान के आरोही क्रम में रखने पर बीच वाले तत्व का परमाणु द्रव्यमान , अन्य दो तत्वों के परमाणु द्रव्यमान के औसत के लगभग बराबर होता है ।

    A)  

2) न्यूलैंड का अष्टक नियम

3) मेन्डलीफ की मूल आवर्त सारणी

4) मोजले की आधुनिक आवर्त सारणी


आधुनिक आवर्त सारणी के गुण :- 

1. आधुनिक आवर्त सारणी को 7 आवर्त तथा 18 समूहों में बाटा गया है।

2. आधुनिक आवर्त सारणी मे 4 ब्लाक S , P , D , F होते है ।

3. आधुनिक आवर्त सारणी में S - block सारणी के वायी तरफ तथा P - block दायी तरफ और D - block आवर्त सारणी के बिच में होता है।

4. S - block मे लगभग सभी धातुयें है।

5 P - block में धातु , अधातु तथा अक्रिय गैस उपस्थित है।


आधुनिक आवर्त सारणी के दोष :-

1. आधुनिक आवर्त सारणी में F - block के तत्वों को कोई स्थान प्राप्त नही है। इन्हे आवर्त सारणी के निचे अलग से रखा गया है ।

2  आधुनिक आवर्त सारणी में हाइड्रोजन का स्थान fix न होना इसके दोषों में से एक है ।






Thursday, 28 March 2024

Drawing your own mechanisms with curly arrow guide line

 Summary of Curly arrow:-

1. A curly arrow show the movement of a pair of electrons.

2. The tail of the arrow show the source of the election pair, which will be a filled orbital ( HOMO ) and can be represented by:

- a lone pair

- or a negative charge

- or a pie bond

- or a Sigma bond

3. The head of the arrow indicates the destination of the election pair, which will be:-

- an empty atomic orbitals where a new bond will be formed.

- or a Sigma antibonding or pie antibonding orbitals where a new bond will be formed and an old bond will break.

- or an electronegative atoms that can support a negative charge.

4. Overall change is always conserved in a reaction.


Note :- B, C , N, and O never have more than four bonds. If you make a new bond to uncharged H, C , N or O you must also break one of the existing bonds in the same step. 




Friday, 9 February 2024

Most Important Reagents

Reagents:-

                 A substance use in the chemical Reaction whose started or end the the rate of chemical reaction.

 Type of Reagents:-

                                      Especially two types of Reagents

A) Electrophile (+)

B) Nucleophile (-)


A) Electrophile:-

                             Electrophile have positive charge and accept election into empty low - energy orbitals represent by one of the following.

1. A positive charge representing an empty orbitals. Like (H+)

2. A neutral molecule with an empty p orbitals. Like (BF3)

3. A double bond to an electronegative element. Like ( CH3-CO-CH3)

4. A single bond to an electronegative element. Like ( HCl ) 


B) Nucleophile:-

                              It have negative charge and denotes election from high - energy orbitals represent by one of the following. 

A) A lone pair. Like ( NH3)

B) A negative charge. Like ( Br-)

C) have a double bond. Like ( CH3 - CH3)

D) A Sigma bond to an electronegative element. Like ( Li-CH3)










Functional Group and IUPAC Nomenclature

 Functional Group:-

                                  Functional Group is a group of atom whose difine the physical and chemical properties of any molecule. Some functional Group is written below.

1. Alkanes:-

                    When two carbon atoms is attached with a single bond then called alkanes. It's symbol is (C-C) . When you write the IUPAC name then add the suffix ( Ane) . 

Example:- methane (CH4) , Ethane (CH3-CH3 ), Chloro Ethane (CH3-CH2-Cl ) etc.


2. Alkenes:-

                       When two carbon atoms is attached with a bubble bond then called alkenes . It's symbol is (C=C) . When you write the IUPAC name then add the suffix ( ene) . 

Example:- methene, Ethene, Propene etc . 


3. Alkynes:-

                       When three carbon atoms is attached with a tripple bond then called alkynes. When you write the IUPAC name then add the suffix (yne).

Example:- Methyne , Ethyne etc.


4. Alcohol (-OH):-

                               When a carbon chain attached with -OH Bond then called Alcohol Group. When you write the IUPAC name then add the suffix (ol) .

Example:- methanol , Ethanol, etc


5. Aldehyde:-

                       When a carbon chain attached with ( -CHO) bond then called aldehyde group. When you write the IUPAC name then add the suffix ( al ) .

Example:- methanal , Ethanal, Propanal etc.


6. Ketone:-

                  When two carbon chain add with ( -CO ) Functional Group like ( RCOR ) is called ketone. When you write the IUPAC name then add the suffix ( one

Example:- Methanone , Ethanone etc.


7. Ether :-

                 When two carbon chain add with ( R-O-R ) like functional group is called Ether. When you write the IUPAC Name then add the suffix ( oxy ) in small size chain.

Example:- Methoxy methane, ethoxy propane etc.


8. Carboxylic acid:-

                              When a carbon chain add with RCOOH Functional Group like ( R-COO-H) 

Is called carboxylic acid. When you write the IUPAC name then add the suffix ( oic acid) .

Example:- Methanoic acid, Ethanoic acid etc.


9. Ester :-

                 When two carbon chain add with RCOOR Functional Group like ( R-COO-R) is called ester. When you write the IUPAC name then add the suffix ( oate ) . 

Example:- Methyl methanoate , Methyl ethanoate , Ethyl propanoate etc .


IUPAC Nomenclature:-

                                          All Chemical compound have two types of name , first is comman name and second is IUPAC Name. In this blog we discussed about IUPAC Nomenclature or IUPAC name. IUPAC name written only carbon chain.


Carbon chain:-

                          When two or more carbon atoms attached with one another is called carbon chain. 

1. One Carbon atom -  Meth

2. Two carbon atoms chain - Eath

3 Three carbon atoms chain - Prop

4. Four carbon atoms chain - But

5. Five carbon atoms chain - Pent

6. Six Carbon atoms chain - hex

7. Seven carbon atoms chain - Hept

8. Eight carbon atoms chain - Oct

9. Nine carbon atoms chain - Nan

10. Ten carbon atoms chain - One dec











Monday, 18 December 2023

Co-ordinate and Bioinorganic Chemistry

 Co-ordination Chemistry:-

                                               सर्वप्रथम हम Co-ordinate Bond and covalent bond मे अन्तर को जानने की कोशिश करते है।


      Electroneutrality Principal:-

                                                      किसी केन्द्रीय धातु पर उपस्थित वास्तविक आवेश (Real Charge) का लगभग शून्य हो जाना Electroneutrality कहलाता है। 


Difference between oxidation state and real charge:-

                                                                                              oxidation state Is a hypothetical concept and real charge is a real concept.


oxidation state  :-

                                Oxidation state is a hypothetical concept.

Example:- find the oxidation state of Co in [Co(NH3)6]+3

            Solution:-

                           Let oxidation state of Co = x

                      x + 6*(0) = +3

                          x = +3 And

So oxidation state of Co is +3 .


Real charge :-

                       Real charge को हम Pauling Rule के नियम से ज्ञात करते है Pauling Rule कुछ इस प्रकार है।


Pauling Rule :-

                           इस नियम के अनुसार " किसी यौगिक पर उपस्थित आवेश ( charge ) उस यौगिक के केन्द्रीय प्रमाणु से जुड़े तत्वों मे विभक्त हो जाता है। और खुद केन्द्रीय प्रमाणु पर आवेश लगभग शून्य होता है। "

Important points:-

1. Real charge जिस भी धातु का शून्य के जितना करीब होगा वह धातु या metal उतना ही अधिक Stable होगा । चाहे उस धातु पर आवेश धनात्मक हो या -Ve इसका कोई असर नहीं पड़ेगा ।


Example:-  find the more stable compound in given table.

1. MLn real charge is 0

2. MLx real charge is +0.23

3. MLy real charge is -0.8

     Solution:-

                 According to Pauling Rule more stable compound is MLn. So Option 1 is right Answer. 


2. More stable ----------> More neutralisation -------> less real charge


Some important NET Questions 

Q1. Pauling predicted semiquantitative calculation of charge present on central atom are. 

 




Thursday, 14 December 2023

How to solve Taskbar location Problem ( टास्कबार लेफ्ट या राइट मे हो जाये तो कैसे सही करे )

 How to solve Taskbar location Problem ( टास्कबार लेफ्ट या राइट राइड मे हो जाये तो कैसे सही करे ) :-


     
            Taskbar location Problem या कहे कि टास्कबार के लेफ्ट या राइट हो जाने वाली समस्या एक अनजाने मे आने वाली एक प्रकार कि समस्या है, जो लोगो को कुछ समय के लिए परेशान कर देती है कभी कभी तो यह समस्या अपरिचित होने के कारण बडी समस्या का रूप भी ले लेती है। अक्सर यह समस्या हमारे नये कम्प्यूटर आपरेटर भाईयों को होती है। आज हम आपको इसे सही करने के तरिको को बतायेंगे ।

                  सर्वप्रथम हम टास्कबार मे राइट Click करेगे तो हमे निचे दिए गए पिक्चर कि तरह से screen open होगी ।



               उपर दिये गये Picture के अनुसार टास्कबार प्रोपर्टी को open करे तथा उसमे हमे एक टास्क बार लोकेशन ऑन स्क्रीन का option बना होगा जैसा कि नीचे दिखाया गया है ।



      हमारा टास्क बार Left side मे है तो यहां पर Left लिखा होगा वहां पर हमे Bottom Select करना होगा Bottom select करते ही हमारा टास्क बार नीचे चला आयेगा और हमारी समस्या खत्म हो जायेगी  और हमारी Screen कुछ इस प्रकार दिखेगी ।





 प्रिय मित्रों और पाठक बंधुओं यदि आपको हमारे कन्टेंट अच्छे लगे हो तो अपने सुक्षाव लिखकर हमे अवश्य भेजें तथा हमारे इसी नाम से बने youtube channel को भी जरूर fallow करें धन्यवाद ।








 


Computer screen का icon बडा - बडा हो जाये तो उसे कैसे सही करे ( How to solved small and large icon problem)

 Computer screen का icon बडे - बडे हो जाये तो उसे कैसे सही करे :-

                                                                                                   Computer screen के icon के बडे हो जाने की समस्या एक कॉमन समस्या है , अक्सर हमारे द्वारा कम्पयूटर की सफाई करते समय अनजाने मे ऐसी - ऐसी समस्या उत्पन्न हो जाती है जिसका समाधान हमे तुरन्त नही मिल पाता है। और हम परेशान हो जाते है। Computer screen के icon बडे हो जाना उनमें से  ही एक है। 


  

             कम्प्यूटर का Screen बडे हो जाने पर कुछ इस प्रकार दिखाई देता है। इसे सही करने के लिए सर्वप्रथम आपको कम्पयूटर के Screen पर Right Click करना पड़ेगा , Right click करने पर Properties open होगी जैसा की निचे दिखाया गया है।


 
              View option पर जाने पर एक नया लिस्ट दिखेगा जिसमें Large icons, Medium icons, Small icons होगा जैसा कि नीचे दिखाया गया है।




                    जैसे ही आपके द्वारा इन विकल्पों में से किसी एक को चुना जायेगा आपके Sereen मे वह बदलाव देखने को मिल जायेगा । जैसा कि मैंने medium विकल्प को चुना तो हमारा Sereen कुछ इस प्रकार से दिखाई देगा ।



Seen this blog video.  Click here 

आप सभी को बहुत बहुत धन्यवाद हमारे ब्लाग पर आने के लिए आप अपना कॉमेंट लिखाना न भूले ।



Saturday, 16 September 2023

Acid Base and Salt | Lesson - 2 Class - 10 | Basic Chemistry Part - 4

 Home Page.           Vipin Sir Live Class Test 


अम्ल क्षार तथा लवण :

अम्ल :- 

      1 . इसका स्वाद खट्टा होता है।

     2 . ये अपने जलीय विलयन मे हाइड्रोजन ( H +) आयन देता है।

    3 . अधिकतम अम्ल ज्वलनशील होते है। तथा यदि ये कपड़े व चेहरे पर गिर जाये तो उन्हे जला देते है। अतः इसका प्रयोग बहुत ही सावधानी के साथ किया जाना चाहिए ।


अम्ल के प्रकार : 

1. तन्नु अम्ल ( strong Acid )

2. कमजोर अम्ल ( Weak Acid )

3. सांन्द्र अम्ल ( concentrate Acid )

4. जल मिश्रित अम्ल ( Dilute Acid )


1. strong Acid :-

                             HCl , H2SO4  etc.


2. Weak Acid:-

                        Acetic acid , Oxalic acid etc. 


3. Concentrate Acids:- 

                                      When less quantity of water present in the Acid is called concentrate Acids. It is used in the Maximum Reactions.

जब किसी अम्ल मे पानी कि मात्रा कम उपस्थित हो तो उसे सांन्द्र अम्ल कहते हैं अधिकतम रासायनिक अभिक्रिया में इसका प्रयोग किया जाता है ।


4. Dilute Acid:-

                           When the Maximum quantity of water present in the Acid is called Dilute Acid.

जब किसी अम्ल मे पानी की अधिकतम मात्रा उपस्थित हो तो उसे जल मिश्रित अम्ल कहते है।


अम्ल का प्रसार ( Defution of Acid ) :

1 . अम्ल में कभी भी पानी को नही मिलाया जाता है क्योंकी यदि अम्ल में जल को मिलाया जाता है विस्फोट के साथ ऊष्मा बाहर निकलती है।

2. जल मे अम्ल को बुंद - बुंद करके मिलाया जाता है। 


क्षार :-

     1. इसका स्वार कड़वा होता है।

     2. यह छुने मे साबुन के विलयन की तरह होता है।

     3. यह अपने जलीय विलयन मे OH आयन देता है।



Monday, 21 August 2023

Chemical Reactions Lesson -1 Class -10 | Most Important Chemical Reactions NCERT MCQ

 Home Page             Vipin Sir Live Class Test


रासायनिक अभिक्रिया अभ्यास प्रश्न :- 

प्रश्न 1. निम्नलिखित रासायनिक अभिक्रियाओं को संतुलित किजिए तथा अभिक्रमक ,  उत्पाद तथा उत्प्रेरक को भी ज्ञात किजिए । 

1. हाइड्रोजन + आक्सीजन   -------------> जल 


2. हाइड्रोजन + क्लोरीन -------------------->  हाइड्रोक्लोरिक एसिड


3. लोहा ( फेरिक ) + जल ------------------------> फेरिक ऑक्साइड + हाइड्रोजन


4. सोडियम क्लोराइड + सल्फोरिक एसिड --------> सोडियम सल्फेट + हाइड्रोजन क्लोराइड


5. जिंक कार्बोनेट ----------> जिंक ऑक्साइड + कार्बन डाइऑक्साइड


6. मेथेन ------------ क्लोरीन / प्रकाश ------> मेथिल क्लोराइड + हाइड्रोक्लोरिकि एसिड 


7. मैग्नेशियम +  हाइड्रोक्लोरिकि एसिड  -----------> मैग्नीशियम क्लोराइड + हाइड्रोजन गैस


8. फेरिक ऑक्साइड + एल्यूमीनियम ---------------> एल्युमिनियम ऑक्साइड + फेरिक


9. जल ----------------------> हाइड्रोजन + ऑक्सीजन


10. सल्फोरिक एसिड -----------------> हाइड्रोजन + सल्फेट





Some other topics:-

1. Computer science 

2. General knowledge and current affairs 


Friday, 28 July 2023

How to Filter data in Excel | How to apply filter in Excel sheet

 Home Page.                 Vipin sir Live Test Class -10


               In the previous topic I will discuss how to Create a designer Table in ms Excel . If you don't shee the previous part then see it . In this part I will discuss about how to Filter data in Excel. First we make a Table like the below picture.


In the above picture given the date wise. If you want to Filter it then you follow the sixth step. 


Step 1 :-

              In this step we go to the small filter icon in table. Icon look like a below picture pointed by mouse pointer. When you click this icon then filter is open like the below picture. In this picture data filter all options is check. 

When all options is check then all table is show in your screen. If all options are not checked then all table is not show. In this case I say that Excel filter is apply.

Step 2:-

              In this step uncheck the all show option in the filter box. If you click ok then all table data is eliminate. So don't click the ok without fallow the all step.



Step 3:-

             In this step select the month whose date is filter right now. When you click the month then open the picture like below. But date is not show then click the + icon in left side of month.



Step 4:-

            In this step when you click the left side of month + icon all month is show like the below picture.



Step 5:-

           In this step select the date whose date is filtering. When you select the date then look at the screen like below picture.



Step 6:-

            First you fallow all the above steps then In this step click ok button. As soon as you click the ok button then open the change table like below picture.



  Again you want to eliminate the filter then you goto the filter icon and select the show all and click the ok button. Your all table is show again.


Some other topics:-

1. How to Create a designer Table in MS Excel 

2. HTML Basic Programming Language Part -1

3. TextBox change Module 

4. Who to Solved Script Error in MS Excel 

5. Use Vlookup Formula in MS Excel UserForm TextBox 

6. Who to Lock your MS Excel File 

7. MS Excel UserForm Save And Edit Module Part-1 

8. MS Excel UserForm Save And Edit Module Part-2 

9. TextBox Enter module. 

10. Daily Current Affairs | most important Questions 
















Seperation method of Glucose in Sugarcane using HPLC || HPLC का उपयोग करके गन्ने से ग्लूकोज को अलग करने का तरीका

 गन्ने में मौजूद ग्लूकोज (glucose) की मात्रा का विश्लेषण करने के लिए LC-MS एक बहुत ही प्रभावी तरीका है। यह तकनीक दो प्रमुख चरणों में काम करत...